Home - News - The problem of insufficient displacement of screw air compressor
The problem of insufficient displacement of screw air compressor
Edited:2021-09-15       Views:329

Displacement volume is one of the important parameters of screw air compressors. The first consideration for customers when selecting an air compressor is the displacement volume. The purchased new machines are generally able to meet the company's gas requirements for production, but with the increase in use time, problems such as insufficient air displacement will gradually appear. What should I do in such a situation? Janpa thinks , If you are using screw air compressor equipment, there is a problem of displacement, this solution is the key!


   1. Whether maintenance is timely. Most of the time, the decrease in compressor displacement is not a big problem. In fact, customers are negligent in maintenance. The air filter is blocked and affected by the maintenance time but not immediately. After replacing the air filter, it can be used normally. Lubricants and other filter elements are also very important. Check whether the lubricant is within the standard range. If it is lacking, please add it appropriately.


  2. Whether the intake valve is open. If the intake valve cannot be opened during loading, it can be concluded that the decrease in the displacement of the screw air compressor is due to the failure of the intake valve, which should be removed for repair or replacement.


   3. Motor failure. Because there is a local short circuit in the motor coil, or the bearing is damaged, the motor bearing is damaged, causing the motor speed to be lower than the rated speed, and reducing the compressor displacement. The motor coil, bearing, etc. should be repaired immediately, and the compressor exhaust should be checked after the repair. quantity.


4. Changes in the environment cause the exhaust volume to drop. The higher the altitude, the thinner the gas, and the smaller the gas production per unit time; there is too much water in the air, and there is a lot of water in the compression. In the rear treatment, water vapor Precipitation, resulting in reduced exhaust gas volume.


  5. Excessive production air consumption will also result in insufficient equipment exhaust. At this time, the problem of insufficient air supply can be solved by adding units.


Different places of use have different requirements for screw air compressors. Enterprises can choose air compressors according to their own needs.


 


   Jianpa oil-free air compressors provide you with 100% oil-free water-lubricated air compressors.


Copyright©2021 Jempa compressor (Shanghai) Co., Ltd. All right reserved Copyright © 2021 开云空压机|无油空压机|静音无油螺杆空压机|开云压缩机(上海)有限公司 版权所有 闽ICP备2022005900号-3